Basic Boat Care

Your boat is an investment, whether it is a weekend warrior or an every day fish catching machine, you need to take care of it and maintain it properly. The safety of you and your passengers depend on it!
Lets take a look at some things you can do to keep your boat operating safe and efficiently.

Daily Boat maintenance

If you don’t use protective anti-fouling paint (to repel barnacles in salt water), make sure that you remove your boat from the water every few days. This will prevent build up of algae and barnacles. Scrub and wash the boat while it is wet and before putting it back in the water.
If you use your boat in salt water, give it a freshwater rinse after each day of fishing. Use plenty of soap and water and rinse thoroughly.
If using an electric motor, charge the battery immediately upon returning from your fishing trip.
If you use a battery to start your main engine, check the battery frequently and charge as required.

Weekly And Monthly Boat maintenance

When cleaning your boat, check for any loose fittings, cracks, loose rivets or other parts that need care, special attention or replacement. Fix these immediately, or get the boat to a qualified marina for a detailed check up.
If you don’t like to spend time washing your boat, remove all fishing tackle, seat cushions, electronics and other accessories, then run the boat through a high-pressure car wash or one of the do-it-yourself washing bays. Because of the fittings on boat trailers and some boats, avoid using brush-style car washes.
Use special metal cleaners and scrubbers to maintain easily-corroded chrome, aluminum or stainless steel fittings. This is especially important around salt water.
When washing your boat, consider using bio-degradable detergents and soaps which are less harmful to the environment.

Yearly Boat Maintenance

If you have a wood boat, check it carefully each spring or fall for possible damage or rot. Be particularly vigilant in corners, under decks that might stay moist, along the waterline, and the back of the boat (transom). If you can remove your boat from the water, place it on blocks or turn it over for wintering.
Scrub all boats at least once a year, more often if used in saltwater. You can use a regular brush for aluminum boats, but check with your marina or boat supply retailer for special gentle soaps and tools for scrubbing gelcoat or fiberglass without damage.
Use special fiberglass boat polish to maintain the finish of your fiberglass boat and preserve its value.
Aluminum boats require little care, but many are assembled with rivets. Make sure that you check all rivets to prevent leaks. With the boat in water, use a permanent felt tip marker or chalk to mark those rivets or areas that leak. Boat shops can fix this or you can drill out and re-rivet (use only boat rivets) or seal by hammering on one side while a friend holds a steel stop on the other side of the rivet.